VIVECRYL TOP SILICONE

Silicone Render
Size
Paint Calculator
This product is not for online sale and can only be purchased from selected stores.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Coverage Depends on granulometry and thickness of the application. Granulometry 1 mm = 1.7-2.2 kg/m2, 1.2 mm = 1.8-2.3 kg/m2, 1.5 mm = 2-2.4 kg/m2, 2 mm = 2.5-3 kg/m2.
  • Drying Time 2-4 hours
  • Coats 1
Product Features
  • Excellent resistance to weather conditions and mechanical stress
  • Superior hydrophobia and excellent vapor permeability
  • Easy application

Product Description

VIVECRYL TOP SILICONE is a new, top quality, highly elastic, ready to use silicone plaster in paste form. It has excellent resistance to weather and mechanical stress. It is used as a final protective and decorative coating on exterior and interior walls, such as concrete, plaster and ETICS (external thermal insulation composite systems), especially in areas with high humidity. It is characterized by superior hydrophobia and excellent vapor permeability. It prevents mold and algae. It is part of Vivechrom’s external thermal insulation system THERMOPROTECT.
It is available in 1,0mm, 1,2mm, 1,5mm and 2,0 mm granulometries in white and 317 shades of Vivechrom’s Exterior Colour Collection fandeck via CHROMOSYNTHESIS tinting system.

Application Description

Stir VIVECRYL TOP SILICONE render very well with an electric stirrer, at low speed,
avoiding the formation of bubbles in its mass. The application is done with a stainless-steel spatula or with a machine and in a thickness proportional to its granulometry. Within 15 minutes and after it begins to dry, level with a plastic spatula. The application should be done under conditions of temperature from 5°C to 35°C and relative humidity less than 80%, without interruption on single continuous surfaces, wet to wet, to achieve a nice uniform result.

Caution: Weather conditions play an important role in quality results. Protect surfaces from direct sunlight and air to prevent uneven drying. Do not apply in case of impending rain.

Health & Safety

Harmful to aquatic life with long lasting effects • Keep out of reach of children • If medical advice is needed, have product container or label at hand • Do not get in eyes, on skin, or on clothing • Call a POISON CENTER or doctor if you feel unwell • Do not empty into drains • Avoid release to the environment • Dispose of contents and container in accordance with all national regulations • Contains 1,2-benzisothiazol-3(2H)-one and C(M)IT/MIT(3-1) and OIT. May produce an allergic reaction • Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist. Contains the biocidal products- 3-iodo-2-propylbutylcarbamate (IPBC) (CAS- 55406-53-6), Isoproturon (ISO) (CAS- 34123-59-6), terbutryn (CAS- 886-50-0) for the preservation of the dry film. Poison Control Center for Greece- 210 7793777 / for Cyprus- 1401. Lift with care - gross weight exceeds 10 kg. VOC (Volatile Organic Compounds)- EU limit value for this product category A/c Paints for exterior walls of mineral substrate- Type WB- 40g/l (2010). This product contains max 40 g/l VOC.

Tips & Advice

  • 1. Preparing the Surfaces
    • Surfaces must be flat and solid, clean and dry, free of loose materials, dust and oil.

    • On new surfaces of plaster, concrete etc., you will first need to apply TOP BOND PRIMER which contributes to the better workability of the VIVECRYL TOP SILICONE render.

    • In thermal insulation systems: Apply VIVECRYL TOP SILICONE render as a final coat on top of Vivechrom’s VIVEFLEX 100 or VIVEFLEX 200W fiber reinforced cement mortar, which should have been properly primed. Priming with TOP BOND PRIMER is recommended, which will help the plaster to have even better workability

    • To achieve excellent coverage, in cases of application of dark shades and small plaster granulometry, eg. 1 mm, 1,2mm, prime with the primer TOP BOND PRIMER, tinted in the same shade as the plaster.
  • 2. Cleaning
    • Remove as much material as possible from the tools before cleaning them.
    • Clean the tools immediately after use with water and detergent solution.
  • 3. Storing
    It can be stored for 12 months from the date of production, in its original, closed and sealed packaging, in dry conditions, at temperatures between 5°C and 35°C.
Vivechrom Visualizer app
Fetching the data, please wait...