Good to see you!
Otherwise login by email.
Welcome to Dulux
Otherwise login by email.
Terms & Conditions
Registration complete
Successfully registered, please login
Registration complete
Forgotten your password?
Please enter email address associated to your account
Change Password
Password changed successfully.
Request sent!
If you have concerns about your privacy?
Read our Privacy Policy.
Delete Account
![](https://msp.images.akzonobel.com/prd/dh/egrviv/packshots/ae27e69ea2148dd65c9a4671accee405.png)
FIT HYDROCHROMA
-
Finish Matt
-
Coverage 11 m2/L
-
Drying Time 1 Hour. Drying time depends on weather conditions (humidity, temperature)
-
Coats 2
-
For Frequent Painting
Product Description
FIT HYDROCHROMA is available in White and in unlimited number of shades through Vivechrom’s tinting system CHROMOSYNTHESIS in 3lt and 9lt packages.
Application Description
Health & Safety
Tips & Advice
-
1. Preparing the SurfacesSurfaces must be clean, dry and free from all defective and poorly adhering material, dirt, grease and salts. Dry sanding, flame cutting and/or welding of the dry paint film will give rise to dust and/or hazardous
fumes. Wet sanding/flatting should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used. It is essential to remove cellulosic-based products, lime or watercolours that exhibit interlayer
cohesion failure or have been detached. In that case, it is advisable to use mechanical means or wet and scrape the surface with a knife. For either new or already painted surfaces with watercolour, apply FIT HYDROCHROMA, thinned up to
20% with water for the first coat, and up to 10-15% for the second. -
2. CleaningClean all equipment with clean water & detergent solution immediately after use.
-
3. StoringStore between 5° and 40° C.
How much paint do I need?
Measure the height and length of the surface you want to paint (in metres or centimetres).
![](/content/dam/akzonobel-common/common-assets/paint-calculator-instructions.png)
![](https://msp.images.akzonobel.com/prd/dh/egrviv/packshots/ae27e69ea2148dd65c9a4671accee405.png)
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.
Add a new job
Add a new job
Edit a job
Delete job
Are you sure? All notes, photos and saved items will be deleted.
Save colour
Save to My Workspace
Save product
![](https://msp.images.akzonobel.com/prd/dh/egrviv/packshots/ae27e69ea2148dd65c9a4671accee405.png)
FIT HYDROCHROMA
Save job