Good to see you!
Otherwise login by email.
Welcome to Dulux
Otherwise login by email.
Terms & Conditions
Registration complete
Successfully registered, please login
Registration complete
Forgotten your password?
Please enter email address associated to your account
Change Password
Password changed successfully.
Request sent!
For more tailored inspiration, please fill in the 3 questions below.
If you have concerns about your privacy?
Read our Privacy Policy.
Delete Account
VIVEFIX PLUS PART A
Waterproofing Cement-Based Mortar for Concrete and Plasters
Your Measurements:
Amount Needed:
For the best result we recommend to use
{coatAmount} for {productTitle}
-
Coverage 1.6 kg/m2 for each mm of thickness, depending on the porosity of the substrate.
-
Drying Time 2-5 hours
-
Coats 2
-
Waterproofing of roofs, terraces, bathrooms, water towers, swimming pools
-
High Penetration
-
Suitable for bonding EPS & XPS (thermal insulation) boards
-
For the ETICS waterproofing zone
Product Description
Vivechrom’s VIVEFIX PLUS Part A is a highly durable waterproofing cement-based mortar, for the waterproofing and protection of concrete and plaster surfaces, with excellent adhesion to horizontal and vertical surfaces. It has great resistance to solar radiation and protects concrete from carbonation. It is suitable for waterproofing roofs, terraces, bathrooms, water towers, swimming pools, etc. It can be used as a one-part system by simply mixing with water, or as a two-parts system in combination with elastic emulsion VIVEFIX PLUS Part B, for very enhanced waterproofing and elasticity, eg in waterproofing zone in Vivechrom’s external thermal insulation composite system THERMOPROTECT, or foundation walls, basements, etc. It is certified with the CE mark according to the harmonized standard EN 1504-2:2004.
Application Description
• For Vivechrom’s THERMOPROTECT ETICS system: Pour VIVEFIX PLUS Part B (7 lt) into a suitable container and mix it with VIVEFIX PLUS Part A (25 kg) while continuously stirring with an electric stirrer, at low speed for 3-5 minutes, until a homogeneous paste without lumps is created. The mixture is applied in 60-90 minutes, depending on the temperature conditions.
• As a one-part cement-based waterproof coating: add VIVEFIX PLUS Part A to water while stirring continuously (4-5 lt water / 25 kg powder) VIVEFIX PLUS Part A is applied with a stiff brush, roller, or spatula, depending on the type of application, with maximum thickness of 1mm per layer and total thickness of at least 2mm. The second layer is applied crosswise, when the first layer is hard enough (2-5 hours).
Apply at temperatures from +8°C to +35°C. Do not apply under direct sunlight or strong winds.
• As a one-part cement-based waterproof coating: add VIVEFIX PLUS Part A to water while stirring continuously (4-5 lt water / 25 kg powder) VIVEFIX PLUS Part A is applied with a stiff brush, roller, or spatula, depending on the type of application, with maximum thickness of 1mm per layer and total thickness of at least 2mm. The second layer is applied crosswise, when the first layer is hard enough (2-5 hours).
Apply at temperatures from +8°C to +35°C. Do not apply under direct sunlight or strong winds.
Health & Safety
DANGER. Contains Portland cement • Causes serious eye damage • Causes skin irritation • May cause an allergic skin reaction • May cause respiratory irritation • Keep out of reach of children • If medical advice is needed, have product container or label at hand • Wear eye / face protection • Use only outdoors or in a well-ventilated area • Avoid breathing dust • IF INHALED: Remove person to fresh air and keep comfortable for breathing •IF IN EYES: Rinse cautiously with water for several minutes. Immediately call a POISON CENTER or doctor • Call a POISON CENTER or
doctor/physician if you feel unwell • Do not empty into drains • Dispose of contents and container in accordance with all national regulations • Lift with care - gross weight exceeds 10 kg. Poison Control Center for Greece: 210 7793777 / for Cyprus: 1401.
Tips & Advice
-
1. Preparing the Surfaces• Surfaces must be flat and firm, solid and without cracks, clean and dry, without loose materials, dust and oils. • Before and after application, the substrate should be watersoaked until saturation.
-
2. Cleaning• Remove as much material as possible from the tools before cleaning them • Clean the tools immediately after use with water and detergent solution
-
3. StoringStore for 12 months from the date of production in sealed packaging, in a dry place, preferably on pallets, and at temperatures between +8°C and +35°C.
How much paint do I need?
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.
Add a new job
Add a new job
Edit a job
Delete job
Are you sure? All notes, photos and saved items will be deleted.
Save colour
Save to My Workspace
Save product
VIVEFIX PLUS PART A